Inspiratory Training for Improving Respiratory Strength, Pulmonary Function, and Walking in Cerebral Palsy: A Meta-Analysis.

PURPOSE: To investigate the effects of inspiratory strength training on respiratory muscle strength, pulmonary function, and walking capacity in children with cerebral palsy, with Gross Motor Function Classification System I to III. METHODS: Searches were conducted in CINAHL, LILACS, MEDLINE, and Physiotherapy Evidence Database (PEDro) databases. The outcomes of interest were respiratory muscle strength, pulmonary function, and walking capacity. The quality was assessed by PEDro Scale. The Grading of Recommendations Assessment, Development, and Evaluation system was used to summarize the quality of evidence. RESULTS: Inspiratory strength training increased the strength of inspiratory muscles and may increase the strength of the expiratory muscles. No changes were observed in pulmonary function or walking capacity. CONCLUSIONS: This systematic review provides moderate-quality evidence that inspiratory strength training is effective for increasing inspiratory muscle strength in children with cerebral palsy. Benefits may be carried over to improving expiratory muscle strength but were not observed on pulmonary function or walking capacity.

Procedures and measurement properties of the 6-min step test: A systematic review with clinical recommendations.

OBJECTIVE: To provide information regarding the procedures, safety, tolerability, and measurement properties of the 6-min step test. DATA SOURCES: MEDLINE, EMBASE, CINAHL, and SPORTDiscus (from inception until January 2024). REVIEW METHODS: Studies that examined adults with acute or chronic diseases, and outcomes related to procedures, safety, tolerability, or measurement properties of the 6-min step test were included. Outcome data were summarized and combined in meta-analyses. The quality of included studies was assessed by the Consensus-based Standards for the selection of health Measurement Instruments checklist, and the quality of evidence was determined according to the Grading of Recommendations Assessment, Development, and Evaluation system. RESULTS: Fourteen studies, involving 847 participants, were included. All studies performed the 6-min step test in 6 min; however, some studies varied the step height and the use of upper limb support. The test appears to be safe and well tolerated by individuals. Moderate- to high-quality evidence demonstrated appropriate results for test-retest reliability (4 studies; Intraclass correlation coefficient 0.96; 95% CI 0.91-0.98; n = 125), criterion validity (4 studies; r = 0.53; 95% CI 0.30-0.71; n = 307), and construct validity (4 studies; r = 0.63; 95% CI 0.52-0.73; n = 233). CONCLUSION: This review provides recommendations for applying the 6-min step test in clinical and research settings. No adverse events were reported, and the test appears to be well tolerated. Adequate results were found for test-retest reliability, criterion validity, and construct validity. REVIEW REGISTRATION: PROSPERO (CRD42022347744).

Identification of eQTLs using different sets of single nucleotide polymorphisms associated with carcass and body composition traits in pigs.

BACKGROUND: Mapping expression quantitative trait loci (eQTLs) in skeletal muscle tissue in pigs is crucial for understanding the relationship between genetic variation and phenotypic expression of carcass traits in meat animals. Therefore, the primary objective of this study was to evaluate the impact of different sets of single nucleotide polymorphisms (SNP), including scenarios removing SNPs pruned for linkage disequilibrium (LD) and SNPs derived from SNP chip arrays and RNA-seq data from liver, brain, and skeletal muscle tissues, on the identification of eQTLs in the Longissimus lumborum tissue, associated with carcass and body composition traits in Large White pigs. The SNPs identified from muscle mRNA were combined with SNPs identified in the brain and liver tissue transcriptomes, as well as SNPs from the GGP Porcine 50 K SNP chip array. Cis- and trans-eQTLs were identified based on the skeletal muscle gene expression level, followed by functional genomic analyses and statistical associations with carcass and body composition traits in Large White pigs. RESULTS: The number of cis- and trans-eQTLs identified across different sets of SNPs (scenarios) ranged from 261 to 2,539 and from 29 to 13,721, respectively. Furthermore, 6,180 genes were modulated by eQTLs in at least one of the scenarios evaluated. The eQTLs identified were not significantly associated with carcass and body composition traits but were significantly enriched for many traits in the "Meat and Carcass" type QTL. The scenarios with the highest number of cis- (n = 304) and trans- (n = 5,993) modulated genes were the unpruned and LD-pruned SNP set scenarios identified from the muscle transcriptome. These genes include 84 transcription factor coding genes. CONCLUSIONS: After LD pruning, the set of SNPs identified based on the transcriptome of the skeletal muscle tissue of pigs resulted in the highest number of genes modulated by eQTLs. Most eQTLs are of the trans type and are associated with genes influencing complex traits in pigs, such as transcription factors and enhancers. Furthermore, the incorporation of SNPs from other genomic regions to the set of SNPs identified in the porcine skeletal muscle transcriptome contributed to the identification of eQTLs that had not been identified based on the porcine skeletal muscle transcriptome alone.

Antioxidant activity of rosemary extract, acerola extract and a mixture of tocopherols in sausage during storage at 8 °C.

Sausage is an emulsified meat product that, due to its composition, undergoes physicochemical changes during its shelf life, which makes the use of additives for its conservation necessary. The goal of the present study was to evaluate the antioxidant capacity of rosemary extract, acerola extract, and a mixture of tocopherols applied to industrialized sausages during storage at 8 °C. The antioxidant activity (IC50) in vitro showed values of 0.043, 0.489, 0.494, and 0.509 mg/mL for sodium erythorbate, rosemary extract, acerola extract, and a mixture of tocopherols, respectively. Formulations of sausage obtained in industrial installations were evaluated in terms of physicochemical, microbiological, and sensorial analyses. The pH and acidity values were stable during 23 days of storage. Treatments 1 and 3 with acerola extract and a mixture of tocopherols associated with sodium erythorbate showed the best results against lipid oxidation (TBARs), respectively. The hydroperoxides were only found after the 12th day of storage, consequently reducing the formation of malondialdehyde. The treatments with natural antioxidants showed an antimicrobial effect for the group of mesophilic bacteria; their results did not exceed 4 log10 CFU/g, while the control reached 5 log10 CFU/g on the 23rd day of storage. In regard to other microorganisms evaluated, no significant differences were found between treatments with natural antioxidants. Thus, the natural extracts evaluated in association with sodium erythorbate contributed to the antioxidant action for the application on an industrial scale, as they improved the sausage characteristics after 23 days of storage at 8 °C. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-023-05815-y.

R3-Walk and R6-Walk, Simple Clinical Equations to Accurately Predict Independent Walking at 3 and 6 Months After Stroke: A Prospective, Cohort Study.

OBJECTIVE: To investigate if independent walking at 3 and 6 months poststroke can be accurately predicted within the first 72 hours, based on simple clinical bedside tests. DESIGN: Prospective observational cohort study with 3-time measurements: immediately after stroke, and 3 and 6 months poststroke. SETTING: Public hospital. PARTICIPANTS: Adults with first-ever stroke evaluated at 3 (N=263) and 6 (N=212) months poststroke. INTERVENTION: Not applicable. MAIN OUTCOME MEASURES: The outcome of interest was independent walking at 3 and 6 months after stroke. Predictors were age, walking ability, lower limb strength, motor recovery, spatial neglect, continence, and independence in activities of daily living. RESULTS: The equation for predicting walking 3 months poststroke was 3.040 + (0.283 × FAC baseline) + (0.021 × Modified Barthel Index), and for predicting walking 6 months poststroke was 3.644 + (-0.014 × age) + (0.014 × Modified Barthel Index). For walking ability 3 months after stroke, sensitivity was classified as high (91%; 95% CI: 81-96), specificity was moderate (57%; 95% CI: 45-69), positive predictive value was high (76%; 95% CI: 64-86), and negative predictive value was high (80%; 95% CI: 60-93). For walking ability 6 months after stroke, sensitivity was classified as moderate (54%; 95% CI: 47-61), specificity was high (81%; 95% CI: 61-92), positive predictive value was high (87%; 95% CI: 70-96), and negative predictive value was low (42%; 95% CI: 50-73). CONCLUSIONS: This study provided 2 simple equations that predict walking ability 3 and 6 months after stroke. This represents an important step to accurately identify individuals, who are at high risk of walking dependence early after stroke.

Visible light-driven CO2 photoreduction by a Re(I) complex immobilized onto CuO/Nb2O5 heterojunctions.

The immobilization of Re(I) complexes onto metal oxide surfaces presents an elegant strategy to enhance their stability and reusability toward photocatalytic CO2 reduction. In this study, the photocatalytic performance of fac-[ClRe(CO)3(dcbH2)], where dcbH2 = 4,4'-dicarboxylic acid-2,2'-bipyridine, anchored onto the surface of 1%m/m CuO/Nb2O5 was investigated. Following adsorption, the turnover number for CO production (TONCO) in DMF/TEOA increased significantly, from ten in solution to 370 under visible light irradiation, surpassing the TONCO observed for the complex onto pristine Nb2O5 or CuO surfaces. The CuO/Nb2O5 heterostructure allows for efficient electron injection by the Re(I) center, promoting efficient charge separation. At same time CuO clusters introduce a new absorption band above 550 nm that contributes for the photoreduction of the reaction intermediates, leading to a more efficient CO evolution and minimization of side reactions.

Massage, laser and shockwave therapy improve pain and scar pruritus after burns: a systematic review.

QUESTIONS: In adults with a burn injury, do non-invasive therapies improve pain and burn scar pruritus, elasticity and vascularisation? Are any effects maintained beyond the intervention period? DESIGN: Systematic review of randomised trials with meta-analyses. PARTICIPANTS: Adults with burn scars. INTERVENTION: The experimental intervention was a non-invasive (ie, non-surgical or non-pharmacological) therapy applied to the burn scar. OUTCOME MEASURES: Pain intensity, pruritus intensity, elasticity and vascularisation. RESULTS: Fifteen trials involving 780 participants were included. The results indicated a beneficial effect on pain intensity on a 0-to-10 scale after massage (MD -1.5, 95% CI -1.8 to -1.1), shockwave therapy (MD -0.8, 95% CI -1.2 to -0.4) and laser (MD -4.0, 95% CI -6.0 to -2.0). The results indicated a beneficial effect on pruritus intensity on a 0-to-10 scale after massage (MD -0.4, 95% CI -0.7 to -0.2), shockwave therapy (MD -1.3, 95% CI -2.3 to -0.3) and laser (MD -4.8, 95% CI -6.1 to -3.5). Massage, shockwave therapy and silicone produced negligible or unclear benefits on scar elasticity and vascularisation. The quality of evidence varied from low to moderate. CONCLUSION: Among all commonly used non-invasive therapies for the treatment of burn scars, low-to-moderate quality evidence indicated that massage, laser and shockwave therapy reduce pain and the intensity of scar pruritus. Low-to-moderate quality evidence suggested that massage, shockwave therapy and silicone have negligible or unclear effects for improving scar elasticity and vascularisation. REVIEW REGISTRATION: PROSPERO (CRD42021258336).

Kinetic and stoichiometric parameters in the fed-batch bioreactor production of poly(3-hydroxybutyrate) by Bacillus megaterium using different carbon sources.

This study investigates the effects of different strategies on poly(3-hydroxybutyrate)-P(3HB) production in a fed-batch bioreactor by Bacillus megaterium using candy industry effluent (CIE), sucrose, and rice parboiled water (RPW) as carbon sources. In biosynthesis, kinetic and stoichiometric parameters of substrate conversion into products and/or cells, productivity, instantaneous, and specific conversion rates were evaluated. The maximum concentration of P(3HB) was 4.00 g.L-1 (77% of the total dry mass) in 42 h of cultivation in minimal medium/RPW added with a carbon source based on CIE, demonstrating that the fed-batch provided an increase of approximately 22% in the polymer concentration and 32% in the overall productivity in relation to medium based on commercial sucrose. Fed-batch cultivation also had the advantage of avoiding the extra time required for inoculum preparation and sterilization of the bioreactor during the batch, which thereby increased the overall industrial importance of the process. Effluents from the candy, confectionery, and/or rice parboiling industries can be used as alternative substrates for P(3HB) production at a low cost.

Is transcranial direct current stimulation (tDCS) effective to improve cognition and functionality after severe traumatic brain injury? A perspective article and hypothesis.

Severe traumatic brain injury (sTBI) is an important cause of disability and mortality and affects people of all ages. Current scientific evidence indicates that motor dysfunction and cognitive impairment are the main limiting factors in patients with sTBI. Transcranial direct current stimulation (tDCS) seems to be a good therapeutic option, but when it comes to patients with sTBI, the results are inconclusive, and some protocols have not yet been tested. In addition, there is still a lack of information on tDCS-related physiological mechanisms, especially during the acute phase. In the present study, based on current evidence on tDCS mechanisms of action, we hypothesized that performing tDCS sessions in individuals with sTBI, especially in the acute and subacute phases, together with conventional therapy sessions, could improve cognition and motor function in this population. This hypothesis presents a new possibility for treating sTBI, seeking to elucidate the extent to which early tDCS may affect long-term clinical outcomes.

Addition of backward walking training to forward walking training improves walking speed in children with cerebral palsy: a systematic review with meta-analysis.

The objective was to examine the effects of backward walking training for improving walking speed and balance in children with cerebral palsy. A systematic review of randomized trials was conducted. Trials had to include children with cerebral palsy, with a Gross Motor Function Classification System, between I and III, that delivered backward walking training as a solo intervention or in combination with forward walking training. The outcomes of interest were walking speed and balance. The methodological quality of included trials was assessed by the PEDro scale, and the quality of evidence was assessed according to Grading of Recommendations Assessment, Development and Evaluation. Eight papers, involving 156 participants, were included. Using random-effects meta-analysis, we estimated that backward walking training improved walking speed by 0.10 m/s [95% confidence interval (CI) 0.05-0.16] and by 2 points on the Pediatric Balance Scale (0-56) (95% CI 1.5-2.2) more than forward walking training. We also estimated that the addition of backward walking training increased walking speed by 0.20 m/s (95% CI 0.07-0.34) and reduced the angular excursion of the center of gravity by 0.5 degrees (95% CI -0.7 to -0.3). The quality of the evidence was classified as low to moderate. In conclusion, overall, backward walking training appears to be as effective or slightly superior to forward walking training for improving walking speed in children with CP. The addition of backward walking training statistically significantly and clinically important enhanced benefits on walking speed.

Predictors of Mortality and Functional recovery after severe traumatic brain injury: protocol for a prospective cohort study

Introduction: traumatic brain injury is a global public health problem due to its severity and high rates of morbimortality worldwide. Identifying predictors associated with increased mortality and unfavorable functional outcomes after the traumatic brain injury event is crucial for minimizing morbidity and mortality rates. Therefore, this study aims to establish a protocol to investigate the predictors of mortality and functional recovery after severe traumatic brain injury in Brazil.Methods: The study will include all patients admitted for severe traumatic brain injury (Glasgow Coma Scale ≤ 8) at the State Hospital of Urgency and Emergency, which is the referral trauma hospital of Espirito Santo. The outcomes of interest are hospital mortality and functional recovery 24 months after hospital discharge. Subjects will be followed up at seventy-two hours, three months, six months, twelve months, and twenty-four months after the trauma. Morbidity will be determined by assessing: 1) the level of motor and cognitive disability, 2) functional impairment and quality of life, and 3) aspects of rehabilitation treatment. Additionally, the traumatic brain injury load, estimated by the years of life lost, will be calculated. Discussion: the results of this study will help identify variables that can predict morbidity and mortality, as well as diagnostic and therapeutic targets for patients with severe traumatic brain injury. Furthermore, the findings will have practical implications for: 1) the development of public policies, 2) investments in hospital infrastructure 3) understanding the socioeconomic impact of functional loss in the individuals.Study registration: the study received approval from the Ethics Committee of the Federal University of Espirito Santo under protocol number 4.222.002 on August 18, 2020.

Introdução: traumatismo cranioencefálico é um problema global de saúde pública devido à sua gravidade e altas taxas de morbimortalidade em todo o mundo. Identificar preditores associados ao aumento da mortalidade e desfechos funcionais desfavoráveis após o evento do traumatismo craniencefálico é primordial para minimizar as taxas de morbidade e mortalidade. Portanto, este estudo tem como objetivo estabelecer um protocolo para investigar os preditores de mortalidade e recuperação funcional após traumatismo cranioencefálico grave no Brasil. Métodos: este estudo tem como objetivo investigar os preditores de mortalidade e recuperação funcional em pacientes com traumatismo cranioencefálico, além de fornecer uma visão geral do traumatismo cranioencefálico no estado do Espírito Santo. O estudo abrangerá todos os pacientes internados por traumatismo cranioencefálico grave (Escala de Coma de Glasgow ≤ 8) no Hospital Estadual de Urgência e Emergência, o hospital de referência para traumas no Espírito Santo. Os desfechos de interesse incluem mortalidade hospitalar e recuperação funcional após 24 meses da alta hospitalar. Os participantes serão acompanhados em setenta e duas horas, três meses, seis meses, doze meses e vinte e quatro meses após o trauma. A morbidade será determinada pela avaliação de: 1) nível de incapacidade motora e cognitiva, 2) comprometimento funcional e qualidade de vida, e 3) aspectos do tratamento e reabilitação. Além disso, a carga de traumatismo cranioencefálico, estimada em anos de vida perdidos, será calculada. Discussão: os resultados deste estudo ajudarão a identificar variáveis que podem predizer a morbidade e a mortalidade após traumatismo cranioencefálico grave. Além disso, as descobertas terão implicações práticas para: 1) o desenvolvimento de políticas públicas, 2) investimentos em infraestrutura hospitalar e 3) compreensão do impacto socioeconômico da perda funcional nesses indivíduos. Registro do estudo: o estudo recebeu aprovação do Comitê de Ética da Universidade Federal do Espírito Santo sob o número de protocolo 4.222.002 em 18 de agosto de 2020

Exploring the conformational dynamics of the CRD4: a model for receptor lysosomal activity shifts in search of 'sweet' and 'sour' states.

The macrophage mannose receptor (RMM) is a crucial component of the immune system involved in immune responses, inflammation resolution, and tissue remodeling. When RMM is activated by a specific ligand, it undergoes internalization, forming an endosome that matures into a lysosome. Within the lysosome, structural changes in RMM facilitate the dissociation of ligands for further processing. However, the precise details of these structural changes are not well understood. In this study, we used molecular dynamics simulations to investigate the conformational dynamics of a specific region called CRD4 in RMM. Our simulations explored different conditions, including pH variations and the presence of Ca2+ ions. By analyzing the simulation data, we found that conformational changes primarily occur in loop regions, while the secondary structure remains stable. The binding site of CRD4, essential for ligand interaction, is located on the protein surface between two specific loop regions. Ligand binding is stabilized by three important amino acids. Interestingly, the interaction patterns differ between monosaccharide and disaccharide ligands. These findings improve our understanding of CRD4's dynamics and how it recognizes ligands. They provide insights into the structure of CRD4 and its role in ligand dissociation within lysosomes. The study also highlights the significance of loop regions in functional dynamics and interactions. Further research is needed to fully uncover the complete structure of CRD4, understand ligand binding modes, and explore the influence of environmental factors. This study lays the foundation for future investigations targeting carbohydrate-protein interactions and the development of therapeutics based on RMM's unique properties.Communicated by Ramaswamy H. Sarma.

Covalent Inhibitors for Neglected Diseases: An Exploration of Novel Therapeutic Options.

Neglected diseases, primarily found in tropical regions of the world, present a significant challenge for impoverished populations. Currently, there are 20 diseases considered neglected, which greatly impact the health of affected populations and result in difficult-to-control social and economic consequences. Unfortunately, for the majority of these diseases, there are few or no drugs available for patient treatment, and the few drugs that do exist often lack adequate safety and efficacy. As a result, there is a pressing need to discover and design new drugs to address these neglected diseases. This requires the identification of different targets and interactions to be studied. In recent years, there has been a growing focus on studying enzyme covalent inhibitors as a potential treatment for neglected diseases. In this review, we will explore examples of how these inhibitors have been used to target Human African Trypanosomiasis, Chagas disease, and Malaria, highlighting some of the most promising results so far. Ultimately, this review aims to inspire medicinal chemists to pursue the development of new drug candidates for these neglected diseases, and to encourage greater investment in research in this area.

Validation of the NAT Chagas IVD Kit for the Detection and Quantification of Trypanosoma cruzi in Blood Samples of Patients with Chagas Disease.

In the absence of validated biomarkers to control the cure of Chagas disease, PCR-based diagnosis is being used as the main tool for an early indication of therapeutic failure. However, since it is considered a technique of complex reproducibility, mainly due to difficulties in establishing accurate controls to guarantee the quality of the reaction, the use of PCR for Chagas disease diagnosis is restricted to specialized centers. In an effort to disseminate the molecular diagnosis of Chagas disease and its applications, new diagnostic kits based on qPCR have been made available in the market in recent years. Here, we show the results of the validation of the NAT Chagas kit (Nucleic Acid Test for Chagas Disease) for the detection and quantification of T. cruzi in blood samples of patients suspected of Chagas disease infection. The kit, composed of a TaqMan duplex reaction targeting the T. cruzi satellite nuclear DNA and an exogenous internal amplification control, presented a reportable range from 104 to 0.5 parasite equivalents/mL and a limit of detection (LOD) of 0.16 parasite equivalents/mL of blood. In addition, the NAT Chagas kit detected T. cruzi belonging to all six discrete typing units (DTUs-TcI to TcVI), similarly to the in-house real-time PCR performed with commercial reagents, which has been selected as the best performance assay in the international consensus for the validation of qPCR for Chagas disease. In the clinical validation presented here, the kit showed 100% sensitivity and 100% specificity when compared to the consensus in-house real-time PCR assay. Thus, the NAT Chagas kit, which is produced entirely in Brazil under the international standards of good manufacturing practices (GMP), appears as an excellent alternative to enable the molecular diagnosis of Chagas disease in public and private diagnostic centers, as well as to facilitate the monitoring of patients under etiological treatment participating in clinical trials.

Manual Therapy Applied to the Cervial Joint Reduces Pain and Improves Jaw Function in Individuals with Temporomandibular Disorders: A Systematic Review on Manual Therapy for Orofacial Disorders.

AIMS: To examine the effect of manual therapy applied to the cervical joint for reducing pain and improving mouth opening and jaw function in people with TMDs. METHODS: A systematic review of randomized controlled trials was performed. Participants were adults diagnosed with TMDs. The experimental intervention was manual therapy applied to the cervical joint compared to no intervention/placebo. Outcome data relating to orofacial pain intensity, pressure pain threshold (PPT), maximum mouth opening, and jaw function were extracted and combined in meta-analyses. RESULTS: The review included five trials involving 213 participants, of which 90% were women. Manual therapy applied to the cervical joint decreased orofacial pain (mean difference: -1.8 cm; 95% CI: -2.8 to -0.9) and improved PPT (mean difference: 0.64 kg/cm2; 95% CI: 0.02 to 1.26) and jaw function (standardized mean difference: 0.65; 95% CI: 0.3 to 1.0). CONCLUSION: Manual therapy applied to the cervical joint had short-term benefits for reducing pain intensity and improving jaw function in women with TMDs. Further studies are needed to improve the quality of the evidence and to investigate the maintenance of benefits beyond the intervention period.

Effect of Extraction Time on the Yield, Chemical Composition, and Antibacterial Activity of Hop Essential Oil Against Lactic Acid Bacteria (Lactobacillus brevis and Lactobacillus casei) Beer Spoilage.

Hop essential oil (EO) generates interest for its antioxidant and antimicrobial properties, in addition to the volatile compounds that are responsible for the hop aroma in beer. Thus, the objective of this study was to evaluate the chemical composition, EO yield, and antibacterial activity of hop essential oil from hops of the Chinook variety against lactic acid bacteria (Lactobacillus brevis and Lactobacillus casei) at different times of extraction. EO extraction was performed by hydrodistillation at different times. By analyzing the chemical composition by gas chromatography and mass spectrometry, the minimum inhibitory concentration (MIC) and the minimum bactericidal concentration (MBC) were determined. The major compounds of hop EO were α-humulene, ß-myrcene, and ß-caryophyllene, and the extraction yields were 0.67, 0.78, and 0.85% mass of EO per mass of hops pelletized hops (m/m), for extractions of 90, 180, and 300 min, respectively. The EO obtained in 90 min was efficient against L. casei at 2.5 mg/mL (MIC) and 5.0 mg/mL (MBC), and the 300 min one against L. brevis at 2.5 mg/mL (MIC) and 25 mg/mL (MBC). The antibacterial activity was affected by the chemical makeup of the oil, revealing that the hop EO extracted in 300 min was the most efficient among the other extraction times.

Influence of redox potential on the accumulation of poly(3-hydroxybutyrate) by Bacillus megaterium.

The main goal of the present study was to evaluate the oxidation-reduction potential (ORP) on the production of poly(3-hydroxybutyrate) (P(3HB)) by Bacillus megaterium. Each microorganism has an optimal ORP range, and changes to the culture medium's ORP may redistribute the cell's metabolic flux, as such, the measurement and control of the ORP profile allows one to, in a way, manipulate the microbial metabolism, affecting the expression of certain enzymes and allowing for better control over the fermentative process. The ORP tests were carried out in a fermentation vessel coupled with an ORP probe, containing 1 L of mineral medium added with agroindustry byproducts (60% v/v of confectionery wastewater, and 40% v/v of rice parboiling water). The system's temperature was kept at 30 °C, with an agitation speed of 500 rpm. The vessel's airflow rate was controlled via a solenoid pump based on the ORP probe's data. Different ORP values were evaluated to verify their impact on biomass and polymer production. Cultures using OPR levels of 0 mV displayed the highest amounts of total biomass (5.00 g L-1) when compared to - 20 mV and - 40 mV (2.90 g L-1 and 0.53 g L-1, respectively). Similar results were also found for P(3HB)-to-biomass ratio, with polymer concentration being reduced when using ORP levels below 0 mV and with a maximum amount of polymer-to-biomass ratio of 69.87% after 48 h of culture. Furthermore, it was possible to observe that the culture's pH can also affect total biomass and polymer concentration, albeit to a lesser extent. Thus, when considering the data found during this study, it is possible to observe that ORP values can greatly impact B. megaterium cell's metabolism. Furthermore, the measurement and control of ORP levels may be an invaluable asset when trying to maximize polymer production under different culture conditions.

Development of a phosphorous-based biorefinery process for producing lignocellulosic functional materials from coconut wastes.

This work aimed to develop a phosphorous-based biorefinery process for obtaining phosphorylated lignocellulosic fractions in a one-pot protocol from coconut fiber. Natural coconut fiber (NCF) was mixed with 85 % m/m H3PO4 at 70 °C for 1 h to yield the modified coconut fiber (MCF), aqueous phase (AP), and coconut fiber lignin (CFL). MCF was characterized by its TAPPI, FTIR, SEM, EDX, TGA, WCA, and P content. AP was characterized regarding its pH, conductivity, glucose, furfural, HMF, total sugars and ASL contents. CFL structure was evaluated by FTIR, 1H, 31P and 1H-13C HSQC NMR, TGA and P content and was compared to that of milled wood lignin (MWL). It was observed that MCF and CFL were phosphorylated during the pulping (0.54 and 0.23 % wt., respectively), while AP has shown high sugar levels, low inhibitor content, and some remaining phosphorous. The phosphorylation of MCF and CFL also showed an enhancement of their thermal and thermo-oxidative properties. The results show that a platform of functional materials such as biosorbents, biofuels, flame retardants, and biocomposites can be created through an eco-friendly, simple, fast, and novel biorefinery process.

Well-dispersed titanium dioxide and silver nanoparticles on external and internal surfaces of asymmetric alumina hollow fibers for enhanced chromium (VI) photoreductions.

Heterogenous photocatalysis is a suitable alternative for wastewater treatment. The supporting of the solid catalyst in a porous material is suggested to facilitate catalyst recovery and reuse. Here we propose for the first time the evaluation of supporting silver (Ag)-decorated titanium dioxide (TiO2) catalysts on internal and external surfaces of alumina hollow fibers with asymmetric pore size distribution. The produced catalysts were considered for Cr(VI) photoreductions. The ultrasound-assisted process potentialized the distribution of Ag nanoparticles on the TiO2 surface. The loading of Ag nanoparticles at concentrations greater than 5 wt% was necessary to improve the TiO2 activity for Cr(VI) photoreduction. The loading of Ag nanoparticles at 30 wt% improved the Cr(VI) photoreduction of the single TiO2 catalyst from 40.49 ± 0.98 to 55.00 ± 0.83% after 180 min of reaction. Suspended and supported Ag-decorated TiO2 catalysts achieved total Cr(VI) photoreduction after 21 h of reaction. The adjusted reaction rate constant with the externally supported Ag-TiO2 catalyst was 3.57 × 10-3 ± 0.18 × 10-3 min-1. Similar reaction rate constants were achieved with suspended and internally supported catalysts (approximately 2.70 × 10-3 min-1). After 10 sequential reuses, all catalysts presented similar Cr(VI) photoreductions of approximately 66%. Nevertheless, the use of the externally supported catalyst is suggested for Cr(VI) photoreductions due to its superior catalyst activity at least in the first reuse cycles.

Ecological drivers of breeding periodicity in four forest neotropical eagles.

We explore the potential factors that affect clutch initiation in four Neotropical large raptors (Harpy eagle-HE, Crested eagle-CE, Ornate hawk-eagle-OHE, and Black hawk-eagle-BHE) by analyzing 414 clutch events mostly obtained from captive individuals. Differences in how clutch initiation is associated with changes in photoperiod were found between HE and both hawk-eagles, and between CE and BHE. Changes in temperature at the time of clutch initiation only differed between HE and OHE, whereas changes in precipitation varied between BHE and all other species. Principal Component Analysis of these environmental cues showed that ellipses in the dataset of each species overlap, but only ellipses from CE and OHE had the same variation trends. This means that although these species live under similar ecological conditions, they exhibit three different patterns of response to environmental cues. Apparently, these patterns are not associated with phylogenetic relatedness because species belonging to the same clade do not show the same response pattern. Diet diversity analysis revealed that HE has the least varied diet, and CE and OHE the most varied diet. The fact that species who fit the same reproductive timing response to environmental cues show similar diets leads us to hypothesize that breeding in these eagles was most likely shaped by food availability.